• Width:  7' Wide or 84” Inside Width

• Height: 6'8" Tall or 80" Interior Height Clearance Floor to Roof Bow

• Tack Room Floor Section: 4' Nominal Length

• 98" Exterior Height with 235/85 R 16 Tires

• Gooseneck Nose Compartment Inside Opening 27"

• Ground Clearance: 14" from side rail to ground

• Ground Clearance: 17" step up from floor to ground

• Punched Aluminum Sides for Ventilation and Strength

• Uprights:  1"x4 3/8" Extruded Aluminum Hat Posts for Added Strength

• Solid One Piece Roof Construction Using .050 Aluminum Sheet

• Welded .157 Extra Heavy High Grip Aluminum Diamond Plate Flat Floor

• 3" Structural Aluminum I-Beam Cross Members Welded to the Floor

• Tapered Front Nose with High Luster Aluminum Radius Corners (7' 9" Long Nose)

• Calf Gate in Gooseneck Nose

• All models have 1 Solid Center Divide Gate Hinged from Curb-Side, with Outside Latch Release

• Full Width Swinging Rear Gate with Left Side Sliding Door with Cam Lock

• (4) Interior Tie Loops Located on Roadside with (2) in each compartment

• (4) Exterior Tie Loops with (2) Per Each Side of the Trailer

• Full Width Rubber Dock Bumper and Underside Skid Plates

• (2) 7,000# Dexter Torsion Axles with EZ Lube Hubs and Electric Brakes on All Wheels

• 12,000# Heavy Duty Dropleg Spring Retraction Jack

• 2 5/16” Diameter Ball Hitch with Adjustable Coupler Height

• Spare Tire & Wheel

• Spare Tire Carrier Mounted Curb Side of Front Drop Leg Jack

• 235/85 R16 E 10 Ply Radial Tires

• Sealed Automotive Style Electrical Harness Mounted Overhead in the Roof Cove Area to Protect Wiring

• Bright Finish Wheel Covers

• 34" Wide Access Door on Driver Side

• D.O.T. Tape

• Interior Dome Light with Switch at the Rear of the Trailer

• Breakaway Battery, Switch & Box

• Safety Chains with Hooks

Standard Features in Tack Area

• Straight Wall 4' Back from Bulk Head Wall with a 30" Side Door Located on Roadside Equipped with a Sliding Tinted Window and Screen. 

• The Nose Compartment is Equipped with (2) 24" x 15" Tinted Sliding Windows.

• The Tack Room is Equipped with (3) Saddle Racks, (1) Bridle Rack with 8 Hooks, and 1 Blanket Rack.

• Interior Dome Light Located Over the Door Providing Interior Lighting.

• Option #2000 Front nose compartment access door, roadside location (Door in Left Side of Nose)

• Option #2001 Roll Up Door in Rear Gate on the Left Side ILO standard sliding rear gate

• Option #2007 Front nose compartment access door, curbside location (Door in Right Side of Nose)

• Option #2008 Front Access Door on curbside location (Right Side) ILO Standard Roadside (Left Side) Location

• Option #2005 Add 2nd Full Swing Divide Gate.  Add Swinging Divide Gate to Make 3 Compartments.  (2 Full Swing Divide Gates)

• Option #2006 Sliding Combo Gate with Full Swing Divide Gate ILO Standard Swinging Divide Gate (1 Slide Full Swing Divide Gate)

• Option #2009 Sliding Combo Gate with Full Swing Divide Gate.  Add 2nd Sliding Combo Gate with Full Swing Divide Gate to Make 3 Compartments.  (2 Slide Full Swing Divide Gates)

• Option #2016 Swing Combo Gate, in center divide gate, ILO the standard Full Swing Divide Gate

• Option #2022 Canadian Compliance

• Option #2010 Extra Marker Lights

• Option #2023 Three I.D. Marker Lights Located on the Front Top Rail

• Option #2024 Mid-Turn Lights (One Each Side) Extra oval amber lights for marker and turn signal location

• Option #2011 Extra interior load light.  Available on interior road side cove only.

• Option #2012 Extra rear stop and tail lights.  Includes two tail lights, one each side of rear, located above the standard tail lights. 

• Option #2013 Rear header exterior load lights.  Includes two lights and on/off switch at the rear. 

• Option #2025 LED tail light bulb ILO incandescent light bulb

• Option #2026 LED marker light bulb ILO incandescent light bulb

• Option #2027 LED mid-turn light bulb ILO incandescent light bulb

• Option #844 Lighted Sign mounted front end of the gooseneck

• Option #840 Sign, clear plate, white vinyl background with standard lettering

• Option #855 Sign, clear plate, vinyl background with custom lettering

• Option #846 Sign, clear plate, vinyl background with custom artwork

• Option #2002 Goldline Top Rail.  Includes the gold anodized top rail cover permanently attached to the top rail, sides only.

• Option #2004 Outside Tie Loops. 

• Option #2021 Inside Tie Loops. 

• Hole Plug Kits